Amigurumi Beige Bear Free Crochet Pattern ⋆ AMIGURUMI DAILY

#amigurumi #freepattern #freepatternamigurumi #crochettoppattern #crochet #crochetpattern

What does amigurumi means?
The word Amigurumi comes from Japanese. The Japanese call handicrafts knitted with crochet and needle as Ami. The Japanese call the toys that are filled with objects such as fibers or cotton as Nuigurumi. The word Amigurumi is derived as a combination of these two words.

Amigurumi knitting techniques are very easy. You can find many handcrafts prepared with these techniques on my site. What is Amigurumi for beginners in Amigurumi handwork? How to knit amigurumi? In this blog, where you can find the answers to the questions with pictures, you will be able to learn about Amigurumi in all details.

I share in this blog are amigurumi cats, amigurumi dogs, amigurumi fish, amigurumi unicorn, amigurumi penguins, amigurumi parrot, amigurumi giraffe, amigurumi pigs, amigurumi bunnies, amigurumi cows, amigurumi sheeps, amigurumi bees, amigurumi dolls, amigurumi snakes, amigurumi mice, amigurumi elephants, amigurumi pumpkins, amigurumi pandas, amigurumi owls, amigurumi cartoon characters, amigurumi twetters, amigurumi caterpillars and more …

Also I’m sharing new amigurumi free patterns every day.
Todays daily new amigurumi free crochet pattern is Bear.
I want to give you some informations about this pattern;

Author: Olya Joy

LITTLE BEAR

Necessary materials:

– yarn “Kuzya Klubochkin”, milky color (95 m / 50 g) – 1 skein;

– yarn Pekhorka “Openwork”, color 03 light beige (280 m / 50 g) – 1 skein;

– hook Clover No. 1.5 (choose according to the thickness of the yarn);

– filler (holofiber);

– two small beads for the eyes (you can use ready-made eyes);

– black or brown thread for the spout;

– bobbin thread in the color of the yarn, for sewing on the muzzle and ears;

– needle and thread for tightening;

– for fixing the head: 2 discs 15 mm, 1 T-pin 18 mm; for attaching the upper paws:

4 discs 12 mm, 2 T-pins 18 mm; for attaching the lower paws: 4 discs 15 mm, 2 T-pins 18 mm;

Note: The paw discs must be selected so that they fit snugly into the paw.

– manicure scissors for cutting;

– oil pastels for toning;

When using these materials, you get a bear with a height of 11-12 cm. The yarn consumption is small.

Abbreviations:

vp – air loop;

sc – single crochet;

pr – increase;

ub – reduction.

Preparing for knitting

Yarn “Kuzya Klubochkin” consists of three twisted threads. We will knit the bear in one thread, so it is necessary to divide the hank into three, one thread each.

We connect the thread of the Kuzi Klubochkin yarn and the thread of the Openwork yarn and start knitting.

Head

1 row. 6 sc in the amigurumi ring

2 row. 6 pr (12)

3 row. (1 sc, inc) × 6 times (18)

4 row. (2 sc, inc) × 6 times (24)

5 row. (3 sc, inc) × 6 times (30)

6 row. (4 sc, inc) × 6 times (36)

7-12 rows. 36 sc (6 rows)

13 row. (4 sc, dec) × 6 times (30)

14 row. (3 sc, dec) × 6 times (24)

15 row. (2 sc, dec) × 6 times (18)

16 row. (1 sc, dec) × 6 times (12)

We stuff our heads.

We take a 15 mm disc and a T-shaped cotter pin. We make the fastening – we insert the cotter pin into the disk.

We insert the cotter pin into the hole.

17 row. 6 dec

We tighten the hole. We cut the thread, fasten it and hide it inside the part.

We take manicure scissors and make a neat haircut of the head.

muzzle

We knit a chain of 5 ch

1 row. from the second loop 3 sbn, 3bn in 1 p, we continue to knit on the other side 2 sbn, inc (10)

2 row. inc, 2 sc, 3 inc, 2 sc, 2 inc (16)

3 row. 16 sc

The thread is cut and fastened.

We take manicure scissors and make a neat haircut of the muzzle.

Ears (2 parts)

We knit in one thread “Kuzi Klubochkin”, without the thread “Openwork”.

1 row. 6 sc in the amigurumi ring

2 row. 6 pr (12)

3 row. 12 sc

4 row. Fold the two sides of the part and knit 6 sc, through the loops of both sides.

The thread is cut and fastened.

We take manicure scissors and make a neat haircut of the ears.

Assembly and design of the head

With the help of sewing pins, we mark the center of the head, places for the ears and fasten the muzzle. We sew the muzzle with bobbin threads. You can carefully outline the shape of the nose with a pencil.

We embroider a nose.

Next, we will make weights, but you can do without them.

We do eye tightening.

Insert the needle at the point of the left ear (starting point) and withdraw it at the point of the left eye.

2. Stepping back 1 loop down, insert the needle and bring it out next to the starting point of the ear.

3. We tighten the threads (not much!) And fasten.

4. We hide the ends of the thread inside the head.

Repeat procedure 1 – 4 with the right side.

Sew on the ears. Using a light brown oil pastel and a hard brush, we tint the head.

Let the tint dry.

Sew eyes (beads). We introduce a needle at the bottom of the head, in the neck area. We bring out the needle in the area of the eye and plant the bead, return the needle to the starting point. We repeat this procedure with the second eye. Fasten the thread and hide inside the head.

upper paws

We knit a chain of 4 ch

1 row. from the second loop inc, 1 sc, 3sc in 1 p, continue to knit on the other side 1 sc, inc (9)

2-5 rows. 9 sc (4 rows) 6 row. inc, 8 sc (10)

7-8 rows. 10 sc (2 rows)

9 row. inc, 9sc (11)

10 row. inc, 10 sc (12)

11-13 rows. 12 sc (3 rows)

We stuff the foot, leaving room for the splint fastening.

We take a 12 mm disc and a T-splint. We insert the cotter pin into the foot between the 12th and 13th rows.

14 row. 6 dec

We cut the thread, fasten it and hide it inside the part.

We knit the second foot in the same way, but we insert the cotter pin on the other side.

We take manicure scissors and make a neat haircut of the paws.

lower paws

We knit a chain of 6 ch

1 row. from the second loop 4 sbn, 3bn in 1 p, we continue to knit on the other side 3 sbn, inc (12)

2 row. inc, 3 sc, 3 inc, 3 sc, 2 inc (18)

3 row. 18 sc

4 row. 3 sc, 6 dec, 3 sc (12)

5 row. 4 sc, 2 dec, 4 sc (10)

6 row. 10 sc

7 row. 4 sc, 2 inc, 4 sc (12)

8 row. 12 sc

9 row. (3 sc, inc) × 3 times (15)

10 row. 15 sc

We stuff the paw, leaving room for the splint fastening.

We take a 15 mm disc and a T-splint. We insert the cotter pin into the foot between 9 and 10 rows.

11 row. (3 sc, dec) × 3 times (12)

12 row. 6 dec

We cut the thread, fasten it and hide it inside the part.

We knit the second paw in the same way, but we insert the cotter pin on the other side.

We take manicure scissors and make a neat haircut of the paws.

Body and Assembly

1 row. 6 sc in the amigurumi ring

2 row. 6 pr (12)

3 row. (1 sc, inc) × 6 times (18)

4-6 rows. 18 sc (3 rows)

7 row. 8 sc, 2 inc, 8 sc (20)

We take a disk of 15 mm and a washer. We fasten the head to the connected part. We insert the split pin in the middle so that the marker is at the back.